Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Osaki OS-4000
Summary of Contents for Osaki OS-4000
- Page 1 Instruction Manual OS-4000...
- Page 2 Chair Installations 1. When positioning the chair, please leave 80cm of space behind the backrest to allow free reclining of the backrest. 2. Unplug from outlet when installing the Chair parts. Step 1: Remove the following contents from two cartons: 1) The chair 2) The side boards Step 2: Install the side boards.
- Page 3 Step 4: Attach the connecting rod and the u stay fork of the reclining actuator with the flat head rivet, and secure with a split pin as demonstrated in PIC I and PIC 2. A. Connecting rod (on the backrest) B.
- Page 4 Step 6: Unfold the backrest until you hear it click into place. Step 7: Attach the backrest pad and the pillow pad. A) Attach the backrest pad with the zipper. B) Attach the pillow pad using the hook and loop fasteners. Step 8: Connect the wire plugs.
- Page 5 Step 9: Fix the remote controller to the holder by securing the screws. The back massage strength-control pad has been inserted into the backseat cover. If strong massage is desired, remove the back massage strength-control pad from the cover; this strengthens the massage.
- Page 6 Moving the Chair 1. Lift up the Calves Rest. 2. Then recline the chair to approximately to 45 degrees, so that you can easily move the chair around the house with a slight pull push. Caution: 1) Before you move the chair, please put the footrest back into the original position first. Otherwise, injuries might occur in the process of moving.
- Page 7 Grounding Instructions Fully insert the plug into an appropriate outlet. An improper equipment-grounding conductor may result in electric shock. Contact a qualified electrician if you are not sure that the product is properly grounded. Do not modify the plug that is included with the massage chair. If the plug does not fit the outlet, contact a qualified electrician to install an outlet to fit the massage chair plug.
Need help?
Do you have a question about the OS-4000 and is the answer not in the manual?
Questions and answers