Troubleshooting - Daintree GE current Tetra PowerStrip DS Installation Manual

Tetra PowerStrip DS
®

Troubleshooting

Symptom
Row of modules does not light
Sign does not light
Individual modules do not light
Modules are dim
Maximum Loading per Tetra
SKU Rating
GEDS71-2
GEDS50-2 24VDC
GEDS41-2 5.04W/module
GEDS32-2
GEDSH71-3
GEDSH50-3 24VDC
GEDSH41-3 5.9W/module
GEDSH32-3
Maximum Remote Mounting Distance
25W Power Supply
80W Power Supply
100W Power Supply
180W Power Supply
300W Power Supply
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This Class [A] RFLD complies with the Canadian standard ICES-005. Ce DEFR de la classe [A] est conforme à la NMB-005 du Canada.
Solution
• Check wire connections to power supply to ensure red stripe-to-red and white-to-black or blue connections.
• Check row-to-row polarity connections.
• Check input and output voltage and check power supply input/output connections.
• Check polarity connections.
• Ensure the overall length of the Tetra® LED System does not exceed the maximum load.
• Remove module and replace with another working module.
• Ensure the overall length of the Tetra
• Ensure the length and gauge of the supply wire is equal to or below the recommended remote mounting distance.
24 VDC Class 2 Power Supply
®
25W 80W
Power Supply Dimming Power Supply
Note: Load shall not Note: Load shall not
exceed 1.04A exceed 3.3A
4 modules 14 modules
3 modules 12 modules
18 AWG/0.82 mm
2
Supply Wire
120 ft./36.6 m
20 ft./6.1 m
20 ft./6.1 m
20 ft./6.1 m
20 ft./6.1 m
LED system does not exceed the maximum load.
®
100W
Power Supply
Note: Load shall not
exceed 4.0A
18 modules
16 modules
16 AWG/1.31 mm 14 AWG/2.08 mm
2
Supply Wire
–
25 ft./7.6 m
25 ft./7.6 m
25 ft./7.6 m
25 ft./7.6 m
4
Installation Guide
180W
Power Supply Power Supply
Note: Load shall not Note: Load shall not
exceed 4A per each exceed 4A each
(of 2) output channels (of 3) output channels
16 modules per 18 modules per
output channel output channel
32 modules per 54 modules per
power supply
14 modules per 16 modules per
output channel output channel
28 modules per 48 modules per
powersupply
12 AWG/3.31 mm
2
Supply Wire Supply Wire
–
35 ft./10.6 m 40 ft./12.1 m
35 ft./10.6 m 40 ft./12.1 m
35 ft./10.6 m 40 ft./12.1 m
35 ft./10.6 m 40 ft./12.1 m
300W
powersupply
power supply
2
–