Daintree GE current Tetra GETP35-2 Installation Manual page 21

Tetra LED Tape Gen 2
®
If you have any questions about these instructions or your specific application, please contact support at tetra.support@gecurrent.com.
This product is intended solely for the use of non-residential signage lighting and is not intended for use in any other applications.
IP54 rated: LED modules are not suitable for prolonged submersion or direct exposure to water and must be protected from the weather.
For the latest install guides for your product go to: www.gecurrent.com
Conforms to the following standards:
www.gecurrent.com
© 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information provided is subject to change without
notice. All values are design or typical values when measured under laboratory conditions.
SIGN252 (Rev 02/15/21) Enovia - A-1012632
Installation Guide