Open Stove - GOSUN FUSION User Manual

1
Action Mount
1. The stainless steel cooking tray can easily be cleaned by 1. First Use: Remove from packaging.
2. Slightly lift one end of the Fusion and hinge the
hand; it can also be cleaned by unscrewing the wooden
handle and placing the tray in the dishwasher. corresponding Leg so that it is in the standing position.
Repeat on the opposite Leg.
2. It is recommended that you clean the inside of the glass
3. Disengage the Rubber Latches located on the top of
tube after every three uses to prevent build-up of grease
the unit.
or food matter, which can a ect the flavor of food.
4. Completely open the Reflectors.
3. Clean the cooking tray after every use, clean the 5. Pull lightly on the center of all four Reflector Arms to
tube when needed and only after it has cooled down.
lock them horizontally
4. If the reflectors become deformed due to an impact
or other accident, they may be returned to their original
shape by bending by hand. A printable reflector is
available at (http://gosunstove.com/pages/reflectorpro-
file) and can be cut to check the shape.
5. If the GoSun cooking tray becomes deformed after
extensive use and becomes noticeably harder to insert
into the tube, it can be remedied by squeezing the tray
by hand.
6. If the evacuated tube breaks, it can be removed and
replaced by following the "Tube Removal" Section on the
opposite side. The GoSun Stove uses the best evacuated
tubes available on the market, however if they are
damaged, a barium layer will oxidize and a white film will
appear on the inside of the outer tube, indicating that
the tube should be replaced.

OPEN STOVE