Power On - GOSUN FUSION User Manual

4
1. Locate the Power Cord.
2. Plug the Power Plug into the port on the Cook Tray.
3. Plug the opposite end into any 12V (15 AMP) power
source, such as the PowerBank.
4. Activate the switch on the power source end, so that
the indicator light turns on.
NOTE: Cooking with both the sun and electricity at the
same time is not recommended. Close the reflectors
when cooking with electricity.
WARNING
• Integrated Electric Heater will immediately get hot
once plugged in. Handle with protective materials.
• Intended for use with 12V, 15 AMP power sources.
Check compatibility before plugging in.
• Do not cook unattended
• Do not heat when the cooking tray is empty
• Device must be stationary when cooking
COOKING WITH ELECTRIC

POWER ON