LG G7050 User Manual page 52

Q&A
Q
Connection is poor even when established.
A
In certain areas, signal strength can vary dramatically. Try
moving to a different location. Heavy network traffic my affect
the ability to connect, or the stability of the call.
Q
LCD does not turn on.
A
Remove and replace the battery and turn on the power. If the
phone still does not turn on, charge the battery and try again.
Q
An echo can be heard during connection with a certain
telephone in a certatin area.
A
It is called Echo Phenomenon . It occurs if the volume is too
high or caused by special properties(semi electronic telephone
exchange) of the machine on the other end.
Q
The phone gets warm.
A
During long calls, or if games/Internet are used for a long time,
the phone may become hot. This is perfectly normal and has no
effect upon the life of the product or performance.
Q
The bell does not ring, or lamp or LCD blinks only.
A
The phone is set to Vibrate or Quiet in the Profiles menu.
Please select General or Loud
102
Q
Standby duration of the phone gradually becomes shorter.
A
Batteries have a limited life. When the battery lasts for half its
original time, it requires replacement. Only use authorised
replacement parts.
Q
Usage time of battery becomes shorter.
A
If the battery time is short, it may be due to the user
environment, or large volume of calls, or weak signals.
Q
No number is dialled when you recall a contact entry.
A
Check that the numbers have been saved correctly, by using
the Contact Search feature. Resave them, if necessary.
Q
You cannot be contacted.
A
Is your phone switched on (
seconds)? Are you accessing the right cellular network? Have
you set an incoming call barring option?
Q
I cannot find the lock, PIN, or PUK code, or password?
A
The default lock code is 0000 . If you forget or lose the lock
code contact your phone dealer. If you forget or lose a PIN or
PUK code, or if you have not received such a code, contact
your network service provider.
For Your Safety
Q A
&
pressed for more than three
103