Step 1
You will need
(H2)
(H3)
8 x Flat washers
(H4)
(H2)
(H5)
8 x Spring washers
(H3)
8 x Bolts
(H4)
(P2)
1 x Spanner
(H5)
(P1)
Fully extend drawers of (P1) as shown. Put spring washer (H3) and then flat washer
(H2) onto the bolt (H4). Align the legs (P2) with the top (P1) and fix with bolt (H4)
and tighten with spanner (H5).
Step 4
Close drawers and turn over not touching the ground during the process.
Page 6
fantasticfurniture.com.au