Table of Contents
Advertisement
NOTE: An active WLAN running
in the background will consume
battery power. To preserve
battery power, activate the
WLAN only when needed.
Find and connect to a WLAN
1.
In Idle mode, open the
application list and select
Settings > Wireless & network
> Wi-Fi settings. The device
will automatically search for
available WLANs.
2.
Select a network under Wi-Fi
networks.
3.
Enter a password for the network
(if necessary).
4.
Select Connect.
Add a WLAN manually
1.
In Idle mode, open the
application list and select
Settings > Wireless & network
> Wi-Fi settings > Add Wi-Fi
network.
2.
Enter the SSID for the network
and select the security type.
3.
Set the security settings
depending on the selected
security type.
4.
Select Save.
Connect to a WLAN using a Wi-Fi
Protected Setup (WPS)
Using WPS, you can connect to a
secured network.
To connect to a WLAN with a WPS
button,
1.
In Idle mode, open the
application list and select
Settings > Wireless & network
Wi-Fi settings.
2.
Select Push Button Connection.
3.
Press a WPS button on the
access point within 2 minutes.
To connect to a WLAN with a WPS
button,
1.
In Idle mode, open the
application list and select
Settings > Wireless & network
> Wi-Fi settings.
2.
Select a network indicated by the
WPS icon and select WPS PIN.
3.
On the access point, enter the
PIN and press the start button.
Wi-Fi Direct
Learn to use the WLAN Direct
feature to connect two devices
via a WLAN without requiring an
access point.
43
Advertisement
Table of Contents
