Page 2
Installation: 1. Put the stand on a flat clean surface and press down lightly then pull down the suction lever to secure stand to desk. 2. Connect the 5V/2A DC Adapter to the power input (A) 3. Connect the USB micro-b cable (B) to the the Headset Stand then connect the other end (C) to the USB cable to your computer USB port 4.
Page 3
RGB LED function: Tap with your finger the touch area located above the Monster M logo, the LED will flash and change the color mode. Long touch to turn the LED off. The Ambient Headset Stand has 7 color modes.