Hooker Furniture 6960-75206-81 Assembly Instruction

60in friendship table w/2-12in leaves

ITEM# 6960-75206-81 60in Friendship Table w/2-12in Leaves

Caution: Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Note:

1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble.

2. Height of this table can be adjusted with or without extension blocks.

Assembly steps without extension blocks (30" height):

Diagram 1

ASSEMBLY INSTRUCTION

Diagram 3

Diagram 2

1. Place table top (E) upside down on a soft surface to

prevent it from being scratched.

2. Place stretcher (F) onto top, make sure pre-drilled

holes on stretcher are aligned with holes on top. (See

Diagram 1)

3. Screw posts (G) through stretcher (F) to top by

turning in clockwise direction. (See diagram 2)

4. Place bases (H) onto posts and make sure all

pre-drilled holes are in alignment, well insert flat

washers (D), lock washers (C) and bolts (B), tighten

all with allen wrench (A). (See Diagram 3)

5. Turn desk upright.

1/3

Table of Contents

Need help?

Do you have a question about the 6960-75206-81 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION ITEM# 6960-75206-81 60in Friendship Table w/2-12in Leaves Caution: Please make sure you have all parts indicated below prior to assembly. This table is heavy and can best be assembled with the help of two or more people. Note: 1.
Page 2 Assembly steps with extension blocks (36” height): 1. Place table top (E) upside down on a soft Diagram 7 surface to prevent it from being scratched. 2. Screw extension blocks (I) to top by turning with clockwise direction. (See Diagram 4) 3.
Page 3 Diagram 8 Diagram 9 Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth. Polish the finish with soft cloth and an industry recognized furniture polish.