Gardener's 8598301 Manual

These hoops can be height-adjusted as plants grow. We recommend placing
the hoops about 3-4' apart. Use with fabrics that are 12' wide by the length
of the tunnel you want to make. Works with our Garden Quilt, All-Purpose or
Summer Weight fabrics as well as a variety of bird, insect, or shade nets.

Parts List

(6) Side Supports
(3) Center Supports
(6) Connectors
(6) Hoop Bases
Step 1. Take two Hoop Bases and place them on opposite sides of your garden
bed. Press them into the ground up to the first crosspiece.
Step 2. Slide a Side Support into each Hoop Base (Figure 1). Slide the
Connectors onto the ends of the Supports and then place a Center Support in
the middle (Figure 2). Adjust the Supports so they are at the desired height
and tighten the knobs to secure them into place.
Step 3. Repeat Steps 1 & 2 to install your remaining 2 hoops approximately 3-4'
apart. Drape your fabric over them and secure it to the hoops. Leave at least
4" of extra fabric on either side of the tunnel, and plenty of fabric on the
ends of the tunnel to reach the ground.
Figure 1
Hoop Base
knobs
#8598301

Adjustable Super Hoops

Assembly

Side Support
Figure 2
Connectors
Side Support
over please
Center Support
1232V Rev 02/19