Maintaining Your Vacuum; Cleaning The Filter; Checking For Blockages - Shark WANDVAC WV400 Series Owner's Manual

MAINTAINING YOUR VACUUM

EMPTYING THE DUST CUP
1. With the power off and the hand vacuum
positioned over a trash receptacle, slide the Dust
Cup release button near the handle, and the dust
cup will drop open. Tap the filter screen lightly to
knock off dust and debris.
s h a r kc l e a n . c o m
1
2. Wipe the screen inside the dust cup lightly with a
dry cloth to remove dust and dirt.
2
1. With the dust cup removed and the power off,
pinch both sides of the filter housing and pivot
it upward to access the filter.
If you vacuum up a hard or sharp object or notice a noise change while vacuuming, check for blockages or
objects caught in the vacuum.
MAINTAINING YOUR VACUUM

CLEANING THE FILTER

1
2. Hold the filter housing over a trash receptacle.
Lift the fabric filter by the metal ring to remove
it from the housing. Tap lightly to remove any
dust and debris, then rinse with water only. Let
the filter air-dry for at least 24 hours or until
completely dry before reinstalling.

CHECKING FOR BLOCKAGES

1. Turn off the vacuum.
2. Check all intake openings to the dust cup and
remove any debris or blockages.
2
s h a r kc l e a n . c o m