Maintaining Your Vacuum Cleaner; Emptying The Dock Dust Bin (Iw3000 Series Only); Emptying The Handheld Vacuum Dust Cup; Cleaning The Dust Cup And Filter - Shark Cordless Detect Pro Vacuum Owner's Manual

MAINTAINING YOUR VACUUM
EMPTYING THE DOCK DUST BIN (IW3000 SERIES)
The dock dust bin holds up to 30 days' worth
of dust and debris� Empty the dock dust bin
when the dust bin full indicator light comes on�
To remove the bin, lift it out by the handle�

EMPTYING THE HANDHELD VACUUM DUST CUP

To empty the handheld vacuum (IW3000
Series) dust cup, turn off the power and hold
the hand vac over the bin� Press the release
button and the dust cup lid will drop open,
releasing debris�
16
s h a r kc l e a n . c o . u k
To empty the bin, hold it over the bin and
press the release button on the side� The
bottom will open to release the debris�
To empty the handheld vacuum (IW1000
Series) dust cup, turn off the power and hold
the hand vac over the bin� Press the release
button and the dust cup lid will drop open,
releasing debris�
MAINTAINING YOUR VACUUM

CLEANING THE DUST CUP AND FILTER

With the dust cup open and the power off,
press both release buttons and slide the
dust cup out of the hand vac�
Press the tabs on both sides of the filter housing
and pull the filter out of the housing� To clean
the filter, rinse it with water only and allow it to
air-dry for at least 24 hours before reinstalling�
To reinstall the filter, slide it back into the
housing, then slide the housing back into place�

REMOVING THE HAND VAC ANTI-ALLERGEN FILTER

Anti-
Allergen
Filter
IMPORTANT: DO NOT use soap when cleaning the filters� Use water only� The vacuum will not have suction if the post-motor filter is not
installed� Ensure that all filters are installed before using�
To deep-clean the dust cup, slide the release
button until the lid opens completely� Wipe
away any dust and debris with a dry cloth,
then rinse it out with water� Use a damp cloth
to remove any remaining debris� Allow the
dust cup to air-dry completely for at least
24 hours before reinstalling it�
1. To access the Anti-Allergen filter, rotate the
filter cover on the the handheld vacuum to
the unlocked position�
2. Pull off the filter cover and lift out the
Anti-Allergen filter�
3. Reinsert the filter, then replace the cover
and rotate it back to the locked position�
Regularly rinse and replace the filters to
maintain your vacuum's suction power. To
clean filters, rinse them with water only� Allow
all filters to air-dry completely for up to 48
hours before reinstalling to prevent liquid
from being drawn into electric parts.
Clean the pre-motor and post-motor filters
as least once a month� Tap off loose dirt
between washes when needed� More frequent
cleaning may sometimes be necessary with
heavy use�
s h a r kc l e a n . c o . u k
17