Adjusting The General Settings - LG FB44DAB User Manual

Adjusting the general settings

1 Display setup menu
2 Select a desired option on the fi rst level
3 Move to the second level
4 Select a desired option on the second level
5 Move to the third level
6 Change the setting
Adjusting the general settings - more you can do
Adjusting the language settings
OSD (Menu Language) – Select a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/ Disc Subtitle/
[Original] Refers to the original language in which the disc was recorded.
[Other] To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language
code list in the reference chapter
before pressing ENTER, press CLEAR.
[Off ] Turn off Subtitle.
(for Disc Subtitle)
Adjusting the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV screen.
[4:3] Select when a standard 4:3 TV is connected.
[16:9] Select when a 16:9 wide TV is connected.
8
FB44-M0F_ENG.indd 8 FB44-M0F_ENG.indd 8
ON REMOTE
SETUP
Uu
i
Uu
i
Uu, ENTER
Disc Menu.
(Page 18). If you make a mistake
Display Mode – If you selected 4:3, you'll need to defi ne how you would like wide screen
programs and fi lms to be displayed on your TV screen.
[Letterbox] This displays a wide screen picture with black bands at the top and bottom
of the screen.
[Panscan] This fi lls the entire 4:3 screen, cropping the picture as necessary.
Adjusting the audio settings
DRC (Dynamic Range Control)
– Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this eff ect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is eff ective for
multi-channel karaoke DVDs only.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and sound. If this
happens you can compensate by setting a delay on the sound so that it eff ectively 'waits' for the
picture to arrive: this is called HD AV Sync. Use U u (on the remote control) to scroll up and down
through the delay amount, which you can set at anything between 0 and 300m sec.
Adjusting the lock settings
To access the lock options, you must enter the 4-digit password. If you have not yet entered a
password you are prompted to do so.
1 Enter a 4-digit password then press ENTER.
2 Enter it again then press ENTER to verify. If you make a mistake while entering number,
press CLEAR then correct it.
Area Code – Select a code for a geographic area as the playback rating level. This determ ines
which area's standards are used to rate DVDs controlled by the parental lock. See the Area
Codes on page 18.
Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to
deactivate the rating.
Password – Sets or changes the password for lock settings.
[New] Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confi rm.
[Change] Enter the new password twice after entering the current password.
If you forget your password you can reset it.
1 Remove the disc in the unit.
2 Press SETUP to display the Setup menu. Input '210499' and press ENTER. The password has
now been cleared.
2010-06-04 2010-06-04 3:08:34 3:08:34