Initial Setting The Area Code; Adjust The General Settings - LG MDT364 Manual

MDS714-A5U_karaoke_LGEPS_ENG

Initial Setting the Area Code

When you use this unit for the first time, you have to set the Area
Code as shown below.
1 Display setup menu
2 Select LOCK menu on the first level
3 Move to second level
The activated Area Code appears on the
second level.
4 Move to the third level
5 Enter a new password
6 Recheck the entered new password
7 Select a code for a geographic area
After select, Rating and Password will be
activated. (page 21)
8 To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
8
2/27/09 10:11 AM Page 8
ON REMOTE
SETUP
U U u u
i i
i i
numerical buttons
(0-9) and ENTER
numerical buttons
(0-9) and ENTER
U U u u I I i i and
ENTER
ENTER

Adjust the general settings

1 Display setup menu
2 Select a desired option on the first level
3 Move to second level
4 Select a desired option on the second level
5 Move to third level
6 Change the setting
Adjust the general settings - More you can do
Adjust the language settings
OSD – Selects a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu – Selects a language for the Audio/
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language
code list in the reference chapter.
Refer to the language code on Page 21.
[OFF] (for Disc Subtitle): Turn off Subtitle.
ON REMOTE
SETUP
U U u u
i i
U U u u
i i
U U u u and
ENTER
Menu/ Subtitle.