Table of Contents
Advertisement
OSD Initial language setting - Optional
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit. English will be selected as the initial
language.
1 Turn the power on
The language list appears
Select the language
Press
4 To confirm press
Initial Setting the Area Code
When you use this unit for the first time, you have to set the Area
Code as shown below.
1 Display setup menu
Select LOCK menu on the first level
Move to second level
The activated Area Code appears on the
second level.
4 Move to the third level
5 Enter a new password
6 Recheck the entered new password
7 Select a code for a geographic area
After select, Rating and Password will be
activated. (page 19)
8 To confirm what you press
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password
8
MDS804-A0U.DNGAFLK_ENG_6114.indd8 8
Adjust the general settings
1 Display setup menu
Select a desired option on the first level
Move to second level
ON REMOTE
4 Select a desired option on the second level
POWER
5 Move to third level
U u I i
6 Change the setting
ENTER
I i and ENTER
Adjust the general settings - More you can do
Adjust the language settings
OSD – Selects a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu – Selects a language for the Audio/ Menu/
ON REMOTE
[Original]: Refers to the original language in which the disc was recorded.
SETUP
[Others]: To select another language, press number buttons then ENTER to
U u
[OFF] (for Disc Subtitle): Turn off Subtitle.
i
i
numerical buttons
(0-9) and ENTER
numerical buttons
(0-9) and ENTER
U u I i and
ENTER
ENTER
Subtitle.
enter the corresponding 4-digit number according to the language
code list in the reference chapter.
Refer to the language code on Page 19.
ON REMOTE
SETUP
U u
i
U u
i
U u and ENTER
2009.7.7 1:53:0 PM
Advertisement
Table of Contents
