FB164-D0P_DDEULL_ENG_5702
9/14/09
Setting the Clock
1 Turn the power on
2 Press for at least 2 seconds
3 Choose from either
AM 12:00 (for an AM and PM display) or
0:00 (for a 24 hour display)
4 Confirm your selection
5 Select the hours
6 Press
7 Select the minutes
8 Press
Using your player as an alarm clock
1 Press TIMER. Each functions flashes.
2 Press SET/RDS when the function you want to be woken by is showing.
3 "ON TIME" will be displayed. This is where you set the time you want the
alarm to start. Use ] ] I I I I / i i i i ] ] to change the hours and minutes and
SET/RDS to save.
4 The "OFF TIME" will be displayed. This is where you set the time you want
the function to stop.
5 Use ] ] I I I I / i i i i ] ] to change the hours and minutes and press SET/RDS
to save.
6 You will be shown the volume (VOL) you want to be woken by. Use
] ] I I I I / i i i i ] ] to change the volume and SET/RDS to save. Switch the system
off. The clock icon "
" shows that the alarm is set.
7 When the system is turned off you can check the time the alarm and turn the
alarm on and off by pressing TIMER.
10
11:27 AM
Page 10
TV sound EZ setup
You can enjoy to sound from TV, DVD and Digital Device. Even in
ON UNIT
power off mode, if you press TVtSPK, then power is on and
1 1 /] ]
automatically changed to AUX OPT mode.
CLOCK
] ] I I I I / i i i i ] ]
1 Connect the unit's OPTICAL IN jack
to jack on optical out of your
TV (or Digital Device etc).
SET/RDS
] ] I I I I / i i i i ] ]
SET/RDS
] ] I I I I / i i i i ] ]
SET/RDS
2 Select the AUX OPT
To select the AUX OPT directly.
3 Enjoy sound
4 To escape from AUX OPT
ON REMOTE
+
TVtSPK
TVtSPK