Setting The Clock; Using Your Player As An Alarm Clock - LG DMS2520 Owner's Manual

Setting the Clock

1. Turn the unit on.
2. Press CLOCK for at least 2 seconds.
3. Choose time mode by pressing C/V on
the remote control or Y/U on the unit.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET/RDS for confirm your selection.
5. Select the hours by pressing C/V on the
remote control or Y/U on the unit.
6. Press SET/RDS.
7. Select the minutes by pressing C/V on
the remote control or Y/U on the unit.
8. Press SET/RDS.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press TIMER. Each functions flashes.
3. Press SET/RDS when the function you want to
be woken by is showing.
4. "ON TIME" will be displayed. This is your desired
time to unit turns on. Press C/V on the
remote control or Y/U on the unit to
change the hours and minutes and press SET/
RDS to save.
5. The "OFF TIME" will be displayed. This is your
desired time to unit turns off.
6. Press C/V on the remote control or
Y/U on the unit to change the hours and
minutes and press SET/RDS to save.
7. Press C/V on the remote control or Y/
U on the unit to change the volume and
press SET/RDS to save.
8. You can adjust to turn alarm on or off by
pressing TIMER.
- On : Alarm function is turned on and you can
check alarm setting status.
- Off : Alarm function is turned off and you
can check "TIMEROFF" massage on Display
window.
,
Note
• After setting a clock function, you can set
alarm function.
y If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
y If you set the alarm time, you can check the
setting state by pressing TIMER even when
the player is turned off.
• If you select DVD/CD mode for alarm sound
source with a DVD/DivX CD on the disc
tray, the alarm sound source is switched to
TUNER mode automatically.
• If you select USB mode for alarm sound
source with multi-device USB, the alarm
sound source is switched to TUNER mode
automatically.
Operating 27
4