Advertisement
Smart Panel Projector Driver Application Note
The hidden functions available for the Viewsonic with this Driver are as follows:
MENU
ADJ UP
ADJ DOWN
ADJ LEFT
ADJ RIGHT
D. Relays
The following table specifies the factory preset
settings for the low-current relays found on the rear
of the Smart Panel. The Configuration Utility can
be used to customize these settings your installation.
Relay 1
ON Maintained
Relay 2
ON Momentary
Relay 3
OFF Momentary
Selection
Momentary; not Binary
E. Other Presets
The following table specifies other default factory settings for this Driver that affect is control of the
Projector.
Power Status Feedback Method
Control Wiring
Control for the Viewsonic with this Driver is via both RS-232 and Infrared.
The following table specifies settings for the Panel's configurable timers. For more information on the
inactivity shutdown feature and the lockout timer see the Smart Panel Configuration and Installation
Guide.
Lockout Timer
Inactivity Shutdown
© 2003 SP Controls Inc. 601 Minnesota Suite 115, San Francisco, CA 94107
ZOOM +
ZOOM –
FOCUS +
FOCUS –
POSITION
TIMER
RS-232 Polling (see note 1)
Infrared Emitter (see note 2)
80 seconds (see note 3)
Disabled
Viewsonic PJ1060
BLANK
MUTE
RIGHT CLICK
LEFT CLICK
RELAYS
PWR
PWR
PWR
ON
ON
OFF
MAINT.
MOM.
MOM.
help@spcontrols.com
500mA MAX. CURRENT
SELECTION
(EXT. SWITCHER CTRL)
4
3
2
1
Advertisement
