Save Configuration; System Setup; Firmware Update; Factory Setting - Delta Electronics IFD9506 Operation Manual

9.6 Save Configuration

After modification of setting values is made, you must press "Apply" and save the settings by click "Save" on this
page.

9.7 System Setup

9.7.1 Firmware Update

Click "Switch" to automatically switch to the engineering mode. DO NOT update the firmware by yourself. If you
need update the firmware, please contact Delta factory or agent for confirmation and further operation.

9.7.2 Factory Setting

After restoring the parameters to the factory values, please power the module on again before use. Be aware that
some of the parameters will keep the values set by rotary switches after the power is on again.
DVP-PLC Operation Manual
Ethernet Communication Module IFD9506
51