Advertisement
Display Interface and Instructions
5
6
1
Knob
4
Output switch
7
RCA-pre out
10
Power switch
Note:
1. Please turn down the volume before connecting the headphones to avoid
excessive volume damage to the headset.
2. According to the advice of health experts, do not listen to the headphones
for a long time so as not affect your hearing.
3. Please use RCA cables with shielded to connect with this device.
4. Indicator status:
a. Red lights for standby, red flashing means system trigger protection;
b. White lights is amp output indicator;
c. Green lights for pre-amp output.
5. Indicator light brightness adjustment:
a.switch the output switch to the PRE mode, the gain selection switch to
HIGH.
b.Then power on the machine, and operate the gain switch, from high gain
→ low gain → high gain → low gain. The light turns blue.
c.Then control the gain selector switch to switch between high gain → low
gain to adjust the brightness of the indicator light.
d. When the adjustment is completed, the indicator light turns green,
indicating that the brightness adjustment is finished.
4
3
7
8
2
6.35mm headphone jack
5
Indicator light
NOTE
8
Ground terminal
2
1
9
10
3
Gain switch
RCA input
6
9
Power AC input
Advertisement
