4. Alignment and Troubleshooting
► Error Code
A1-1210
► Error message
Error: #A1-1210 / Actuator Motor Failure: #A1-1210.
► Symptom
Fuser BLDC motor doesn't work normally.
► Troubleshooting method
※ First, turn the machine off then on. If the error persists, refer to the following.
1) Turn the machine off. Check if there are any papers or foreign matter inside the machine.
2) Check if the Fuser BLDC motor connector is connected properly. Reconnect it.
3) If the toner cartridge is overloaded, replace it.
4) If the Fuser BLDC motor is defective, replace it.
5) If the problem persists after replacing the Fuser BLDC motor, replace the main board.
4-29
Copyright© 1995-2016 SAMSUNG. All rights reserved.