Table of Contents
Advertisement
Instructions for the Installer
Engineers technical data
OVERALL DIMENSIONS
Width:
Depth:
CUT OUT DIMENSIONS
Width:
Depth:
TYPE
TYPE
OF BURNER
OF GAS
Double Crown (wok)
NATURAL
Semi-rapid (medium)
GAS
Auxiliary (small)
Double Crown (wok)
U-LPG
Semi-rapid (medium)
Auxiliary (small)
Important safety requirements
Location
Choose a location free of draughts and open doors and
clear of combustible materials or other fire hazards such
as curtains, etc. The location should ensure convenience
of operation and service. Any adjacent wall surface
situated within 200mm from the edge of any hob burner
and above the height of the hob must be a suitable non-
combustible material for a height of 150 mm for the entire
depth and width of the cooker.
Any combustible material above the hotplate must be at
least 650 mm above the top of the hob and no
construction shall be within 450 mm above the top of the
burner.
A minimum distance of 100 mm. must be left between
the side edges of the hob and any adjacent cabinets or
walls.
All manuals and user guides at all-guides.com
580 mm.
510 mm.
560 mm.
480 mm.
NOZZLE
NOMINAL
MARKS
GAS
1/100 mm CONSUMPTION
MJ/h
1.67
13.00
1.11
6.80
0.89
3.80
1.02
13.00
0.71
6.30
0.55
3.60
SUPPLY CONNECTIONS
Gas:
RC 1/2 inch (1/2 inch male) Rear right hand corner
Electric:
230-240V 50Hz supply
APPLIANCE GAS SUPPLY:
Natural gas 1.0 kPa - Universal LPG 2.75 kPa
NOMINAL
PRESSURE
kPa
Burner
1.00
Auxiliary
Semi-rapid
Double crown
2.75
Aeration adjustment none
WITHOUT A COOKER HOOD ABOVE
700 mm
650 mm
Dia. Tap By-pass
1/100 mm
28
35
42
FITTING THE GAS HOB
400 mm
400 mm
FO 0812
FITTING THE GAS HOB
WITH A COOKER HOOD ABOVE
400 mm
400 mm
FO 0813
7
Advertisement
Table of Contents
