Technical Data - Leister GROOVER 500-LP Operating Manual

3. Technical data

Li-ion battery capacity
Battery voltage
Charging time (battery)
Idle speed
Cutter blade mounting hole
Cutter blade diameter
Blade thickness
Groove depth adjustment
Emission level
Vibration level
Weight
a
c
b
We reserve the right to make technical changes.
The noise and vibration values were determined in accordance with EN 62841. The specified measured values
apply to new tools. In the context of everyday use, the noise and vibration values will vary depending on how the
power tool is used, particularly according to the type of material being processed.
NOTE
The vibration level specified in these instructions was measured using a standardized method of measurement
according to EN 62841 and can be used for the purpose of comparing power tools. It allows you to calculate a
preliminary estimate of the exposure level. The specified vibration level is representative of the power tool's main
applications. However, if the power tool is used for other applications, with different insert accessories, or is not
properly maintained, the vibration level may vary. This can increase the exposure level significantly over the wor-
king period as a whole. For an accurate estimate of the exposure level, you should also consider the times when
the unit is turned off or is running but is not actually being used. This can reduce the exposure level significantly
over the working period as a whole. Identify additional safety measures to protect the operator from vibration
effects such as: maintaining the tool and the accessories, keeping hands warm, and organizing work patterns.
28
Ah
V
min
rpm
mm
mm
mm
mm
L (dB)
pA
(dB)
L
WA
A (m/s )
2
h
kg
lbs
a) mm / inch
b) mm / inch
c) mm / inch
5.0
18.0
max. 45
5,000
20
130
2.6
0–6, infinitely variable
81.3 (K = 3 dB)
92.3 (K = 3 dB)
<2.5 (K = 1.5 m/s )
2
5.5 (including battery)
12.2
445/17.5
212/8.4
336/13.2