Gerima SMA 60 BER-23.G1 Operating Manual page 11

Maintenance:
Maintenance or service work must
only be performed once the machi-
ne's moving parts have come to
rest. Machine parts may become
very hot during operation.
• De-energize the machine by dis-
connecting it from the power
supply.
Machine hazard points:
Milling head
• Never touch the milling head when
the machine is running.
Safety information for servicing, maintenance
and fault elimination:
• Any person who installs, commissions, opera-
tes, inspects, services or maintains the machine
must have read and understood the operating
manual and in particular the safety information
contained therein.
• Machine adjustment, maintenance and inspec-
tion work must be carried by appropriately qua-
lified technical staff.
• Servicing and maintenance work must only be
carried out by appropriately qualified technical
staff.
• All operating equipment must be secured
against accidental activation or energization.
• When performing any servicing, maintenance or
repair work de-energize the machine by dis-
connecting it from the supply and ensure that
the machine cannot be switched on again ac-
cidentally. Put up a warning sign prohibiting
reactivation of the machine (lock and tag out
procedure).
©
Basic safety instructions
• If protective guards or other safety devices have
to be removed for servicing or maintenance work,
they must be reinstalled immediately after the
work has been completed.
• Use only listed operating and auxiliary materials.
• Use only genuine spare parts as listed in the
spare parts list.
• Check bolted connections for tightness.
• Before restarting the machine, make sure that
nobody can be endangered by the running ma-
chine.
• Any unsafe operation is prohibited!
• Never put safety devices inoperative!
• Never wear hanging or protruding clothes which
could become trapped in moving machine parts!
• After maintenance check all safety devices for
function!
Consequences when nonobservance:
• Injury hazards for personnel!
• Damage to the machine!
• Modifications of the machine can
affect the correct operation and sa-
fety of the machine!
Modifications to the machine:
The machine may not be modified, ad-
ded to or converted unless the prior
consent of the manufacturer has been
granted.
Any alterations to the machine must have been ap-
proved by GERIMA GmbH.
This also applies to the welding of the component
parts.
11