Installation Instructions - Cannon STRATFORD 10531G Use And Installation Instructions

INSTALLATION INSTRUCTIONS

SPACE FOR FIXING
The cooker can be close fitted below hotplate level. This requires a minimum distance
of 540mm between cupboard units of hotplate height.
When installing next to a tall cupboard, partition or wall, for a minimum distance of
400mm above hotplate level, allow a side clearance of at least 65mm.
The diagram below illustrates the minimum clearance between the cooker and
adjacent walls, cupboards etc.
The wall behind the cooker between the hotplate and 450mm above, and the width of
the cooker, must be a non-combustible material such as ceramic wall tiles.
If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a
clearance of at least 50mm to allow the main oven door to open fully for when
removing oven shelves.
65 mm Min
540mm min
503 mm Min
COOKER HOODS
If a cooker hood is to be installed, refer to the cooker hood manufacturers' instructions
regarding fixing height.
20