Advertisement
D: Now the rolling motor unit can be taken off.
9 敲击电机 Tapping motor（DC -24V）：
① 取下靠背后盖，皮带在机芯底部
Disassemble the rear cover, you can find the tapping belt at the bottom of the massage mechanism.
② 松下皮带 Loosen the tapping belt.
③剪掉敲击电机和滤波器的线材
Cut the wire connecting the tapping motor and the electric filter.
④ 取下敲击电机的螺丝
敲击皮带 Tapping belt.
Slacken and remove the screws fixing the tapping motor.
⑤ 取下敲击电机，更换新的电机
Then the motor can be removed, a new one can be replaced if needed.
⑥ 逆序装回
Proceed in the reverse order of disassembly when replacing a new motor.
工具 Tools:一把十字螺丝刀，一把尖嘴钳 a plus screwdriver, nipper pliers
取下固定敲电机的 4 枚螺丝
Slacken and remove the screws fixing the tapping motor
Advertisement
