Presetting Radio Stations - Sony HT-CT500 Operating Instructions (HT-CT500) Operating Instructions Manual

1
Press GUI MENU.
"GUI MENU" appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
2
Press X/x repeatedly to select [FM] or
[AM], then press
3
Press X/x to select [Direct Tuning],
then press .
4
Press number buttons to enter the
frequency.
Example 1: FM 89.50 MHz
Select 8 c 9 c 5
Example 2: AM 1,350 kHz
Select 1 c 3 c 5 c 0
Tip
• If you have tuned in an AM station, adjust the
direction of the AM loop antenna (aerial) for optimum
reception.
5
Press .
If a wrong frequency is entered
"– – – .– – MHz" appears and then the display
returns to the current frequency.
If you cannot tune in a station
Make sure you have entered the right frequency.
If not, repeat step 4. If you still cannot tune in a
station, it is likely that the frequency is not used
in your area.
.

Presetting radio stations

You can preset up to 20 FM and 10 AM stations.
In this way, you can easily find stations you often
listen to.
Before tuning, make sure to turn the volume
down to minimum.
YELLOW BLUE
DISPLAY
C, X, x, c,
HOME
RETURN/
EXIT MENU
PRESET REPLAY
TUNING
1
Press GUI MENU.
"GUI MENU" appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
2
Press X/x repeatedly to select [FM] or
[AM], then press
3
Tune in the station that you want to
preset using automatic tuning
(page 66) or direct tuning (page 66).
In case of poor FM stereo reception, switch
the FM mode (page 66).
4
Press TOOLS/OPTIONS.
5
Press X/x to select [Memory], then
press or c.
6
Press X/x to select a preset number.
7
Press .
The station is stored as the selected preset
number.
8
Repeat steps 3 to 7 to preset other
stations.
RED GREEN
GUI
GUI MENU
MENU
TOOLS/
OPTIONS
TOOLS/
OPTIONS
ADVANCE PRESET
TUNING
or c.
continued
67
US