Enjoying The Components While The System Is In Standby Mode; (Hdmi Pass Through) - Sony HT-CT500 Operating Instructions (HT-CT500) Operating Instructions Manual

Enjoying the components
while the system is in
standby mode

(HDMI Pass Through)

You can use the components and a TV connected
to this system without turning on the system.
HDMI signals can be sent from the component to
the TV via the subwoofer.
The default setting is [OFF].
Note
• This function is available when [Control for HDMI] is
set to [ON].
YELLOW BLUE
DISPLAY
C, X, x, c,
HOME
RETURN/
EXIT MENU
PRESET REPLAY
TUNING
1
Press GUI MENU.
"GUI MENU" appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
2
X/x
Press repeatedly to select
[Settings], then press
The settings menu appears.
3
X/x
Press repeatedly to select [HDMI],
then press .
The HDMI menu appears.
4
X/x
Press repeatedly to select [HDMI
Pass Through], then press
The [HDMI Pass Through] menu appears.
5
X/x
Press repeatedly to select the
setting you want, then press
RED GREEN
GUI
GUI MENU
MENU
TOOLS/
OPTIONS
ADVANCE PRESET
TUNING
or c.
or c.
.
Settings Details
[AUTO] When the TV is turned on while the
system is in the standby mode, the
system outputs HDMI signals from
the system's HDMI output jack.
Sony recommends this setting if you
use a TV that is compatible with
"BRAVIA" Sync. This setting saves
power in the standby mode
compared with the [ON] setting.
[ON] When the system is in the standby
mode, the system continuously
outputs HDMI signals from the
system's HDMI output jack.
[OFF] The system does not output HDMI
signals when in the standby mode.
Turn on the system to enjoy the
connected component's source on
the TV. This setting saves power in
the standby mode, compared with
the [ON] setting.
Note
• When [AUTO] is selected, it may take a little more
time for the picture and sound to be output to the TV
than when [ON] is selected.
Tip
• When One-Touch Play is used on a connected
component compatible with "BRAVIA" Sync, how
the system is turned on depends on the HDMI Pass
Through setting.
– [AUTO] or [ON]: the system is turned on
depending on the TV speaker setting.
– [OFF]: By One-Touch Play, the system is always
turned on.
6
Press GUI MENU.
The GUI menu turns off.
65
US