Specifications - Sony HT-BE1 Primary Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
SA-WBE1 (subwoofer)
Max. output
Subwoofer:
Front:
Center*:
Rear*:
* Depending on the sound field settings and the source, there may be no sound output.
Speaker system
Speaker unit
Dimensions (approx.)
Mass (approx.)
North American model:
Other model:
SS-BE1 (satellite speakers)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
General
Power requirements
North American model:
European model:
Other model:
Power consumption
U.S. model:
Canadian model:
Other model:
Operating temperature
Operating humidity
Supplied accessories
Design and specifications are subject to change without notice.
US
26
With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 19
watts per channel minimum RMS power, with no more than 10 % total
harmonic distortion from 220 milliwatts to rated output.
30 W (6 ohms)
15 W + 15 W (6 ohms)
15 W
15 W + 15 W
Bass reflex type
1
130 mm (5 / inches) dia. cone type/
8
215 271 302 mm (8
(w/h/d, not including the projecting parts)
6.3 kg (13 lb 15 oz)
6.4 kg (14 lb 2 oz)
Closed box type
50 mm (2 inches) dia. cone type
6 ohms
1
61 82 65.5 mm (2
175 g (7 oz)
120 V AC, 60 Hz
230 V AC, 50/60 Hz
220-240 V AC, 50/60 Hz
60 W
1.0 W (at the Power Saving Mode)
75 W
1.0 W (at the Power Saving Mode)
45 W
0.3 W (at the Power Saving Mode)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
See page 5.
1 3
/ 10 / 12 inches)
2 4
1 5
/ 3 / 2 / inches) (w/h/d)
2 4 8