Operation - Kogan KASMRWTCPKB User Manual

OPERATION

Getting Started
Long press the Home button on the right side of the device to turn the Smart Watch on.
Charging the Battery
Connect the Smart watch to a computer with the included micro USB cable to charge the
battery.
Lift up the rubber cover of the Micro USB port on the side of your watch. Insert the micro
USB cable (small end) into the Micro USB port on the watch. Insert the larger end of the
micro USB cable into a spare USB port on the computer.
Once the connection is successful, you will see the battery charging symbol displayed on
the watch screen for one second, and then the data transfer symbol. The battery will
continuously charge whilst connected, but you can open PC to find folder smart watch to
transfer data at the same time.
Monitor the watch regularly throughout the charging process.
When the battery is fully charged. A full battery symbol displays on the screen.
Disconnect the watch from the computer.
Note: It will take approximately 3 hours to fully charge the battery. The actual charging time
depends on the power supply, the remaining charge and the ambient temperature of the
charging environment. The optimum ambient temperature is 0° C - 40° C (32° F - 104° F).
If your watch needs longer than 3 hours to fully charge, please try charging from a different
USB power source.
Battery Life
The time the battery lasts between charges depends on usage. Like other electronic
devices, more frequent usage will mean the battery will drain more quickly. Some activities
will be more demanding on the battery, such as taking photos and videos. The expected
battery life is shown below. This is based on the assumption that the screen is turned off
when not in use.
Condition Battery Time
Low Usage 2 weeks
Typical Usage 2-3 days
Heavy Usage 1 day