Page 2
Spy Watch User Manual Charge your device 2-3 hours before first use. · There is strictly distinction between the USB sealing knob and microphone knob. If you not put them back on correctly you may break your spy watch.
Page 3
Knob Screw Instruction: · A: MIC1 and B: MIC 2 are microphone knobs, they have the same height. One without hole for waterproof, one with hole for better sound quality when recording sound alone. C: USB is a USB knob without hole, and it is slightly higher than microphone knobs. Please note inside the USB knob there is a waterproof sealing pad in it to prevent dust or liquid, please note the difference.
Page 4
Note: According to the computer system configuration or difference, the computer may not detect a camera function by once. If the computer can not enter the camera function, but instead views the watch as a USB disk, please remove the camera and connect the camera to the computer again.
Page 5
2. Charge: Connect to computer USB interface or charger. During charging, the red light flashes slowly. When the battery is fully recharged, the red light stops flashing. Note: The recorder has a built-in high-capacity lithium polymer battery. The battery has no memory effect.
Need help?
Do you have a question about the KAWTC8GSPYA and is the answer not in the manual?
Questions and answers