Advertisement
•
Do not overfill.
•
Keep all screws, nuts, and bolts tight.
•
For cold weather operation, store the auger in a cool environment. Transferring the
auger from a warm to a cold place can cause the build-up of harmful
condensation.
•
If the blade performance decreases, turn the auger off and disconnect the spark
plug cap. Carefully inspect the cutting edge of the blade for any signs of wear. If
the blades show any of wear or damage, they need to be sharpened or replaced.
•
Cooling fans, air inlets and linkages must always be free from any debris.
IMPORTANT:
•
The engine must be turned off and be cool and the spark plug cap
must be removed from the spark plug before checking and adjusting
the auger orbits/attachments.
•
The temperature of the exhaust and nearby areas may exceed
(65"C) Avoid contact with these areas.
•
After every 8 hours of operation check the auger for loose or missing
nuts and bolts. Keep these items tightened. Replace missing nuts
and bolts if required.
•
Never store the auger with fuel in the tank inside a building. Potential
sparks may be present and ignite fuel and fuel vapours.
•
Service, maintenance, and adjustments to the auger must be carried
out by Kogan.com
•
Auger must be shut-off, cooled and the spark plug cap removed
before any repair or maintenance can be carried out.
Carburettor
•
Never alter or in any way change the setting of the carburettor.
Advertisement
