Installation Procedure - YASKAWA VARISPEED-616G5 Instructions Manual

2
Installing to Inverter (See Fig. 2)
2.1

Installation Procedure

1
2
3
4CN Option
A connector
2CN Option
C connector
3CN Option
D connector
Connector
terminal
2
Fig.
Turn OFF the main power and wait for the time specified on the cover of the
inverter. Remove the cover and verify that the CHARGE indicator lamp is
OFF.
Plug the 3CN connector of 2C-relay output card DO-02C into the 3CN con-
nector (34 pins) on the control board of the inverter. Gently push DO-02C
until the spacer engages the spacer hole of the option card on the control
board. Fix DO-02C tightly. (See part A of the side view.)
After installing DO-02C, connect the inverter with peripheral devices and
replace the cover of the inverter.
Spacer mounting
hole
Grounding terminal 12
Front view
Installation of 2C-relay output card DO-02C
Option A
Top
Option C
Control board
Option D
DO-02C
Bottom
Mounting base
of inverter
Side view
5