YASKAWA VARISPEED-616G5 Instructions Manual page 3

The 2C-relay output card, DO-02C is mounted on the control board of the invert-
er to output two 1C dry contacts.
This option card is applicable to the following inverter series:
VS−616G5: Entire series
Name
2C-relay
output card
DO-02C
Terminal
block TD
1
Fig.
NOTE
Before use,
(1) Before using DO-02C, read this manual and the manual for the
installation of the inverter.
(2) Before connecting DO-02C or external terminals, turn OFF main power
of the inverter and verify the CHARGE indicaor lamp of the inverter is
OFF.
(3) When ordering DO-02C, specify the name and code number.
Code No.
73600-A007X
Relay (K2) for No. 1
output
Relay (K1) for No.2
output
2C-relay output card DO-02C
Functions
C (1A-1B) dry contact output ×2 circuits
Contact open/close capability:
Connector to inverter
control board (3CN)
250VAC 1A or lower
30VDC 1A or lower
S p a c e r
mounting
hole
3