Advertisement
Quick Links
Advertisement
Related Manuals for Velleman USB INTERFACE KIT FOR ROBOTIC ARM
Summary of Contents for Velleman USB INTERFACE KIT FOR ROBOTIC ARM
- Page 1 Assembly and Instruction Manual...
-
Page 2: Table Of Contents
Contents USB INTERFACE KIT FOR ROBOTIC ARM 1. Product Introduction 2. Tools You May Need 3. Mechanical Parts List 4. Disconnect the wired controller and PCB from Robotic Arm 5.Install USB PCB and cover 6.How it works... -
Page 3: Product Introduction
USB INTERFACE KIT ROBOTIC ARM Product Introduction: This is an optional USB Interface Kit which connects Robotic Arm to Windows personal computer USB port. 2 Tools You May Need: Screwdriver Mechanical Parts List: PCB Cover USB Wires... -
Page 4: Disconnect The Wired Controller And Pcb From Robotic Arm
USB PCB Assembly CD-R Disconnect the wired controlle and PCB from Robotic Arm Move your “Robotic Arm” to the position as shown. - Page 5 Disconnect the controller. Unplug 5pcs black connectors.
- Page 6 Unscrew yellow cover. Unplug 3pcs connectors. Unplug 3pcs connectors. Unscrew 3pcs PCB screws. Unscrew 3pcs PCB screws.
-
Page 7: Install Usb Pcb And Cover
Install USB PCB And Cover: Black Black Orange Orange Fix USB PCB with 3pcs screws. Fix USB PCB with 3pcs screws. Screw P2 PCB cover tightly. - Page 8 Black Black...
- Page 9 Finished Product...
-
Page 10: How It Works
How It Works: See operation details from the enclosed CD-R. Note:1. All the five gearboxes equipped with safety gear, when the arm open, close, up or lower to the maximum position, and user keeps pushing the buttons, the safety gear will start to work to protect the gearbox and make 'da, da, da…'sound. - Page 12 4350001511D...
Need help?
Do you have a question about the USB INTERFACE KIT FOR ROBOTIC ARM and is the answer not in the manual?
Questions and answers