Eu Declaration Of Conformity - TESY ESP32-SOLO-1 Quick Start Manual

EN
Thank you for your trust as a consumer which you have granted to us by purchasing the electrical appliance with a built-in wireless communication
module. The only condition for using the inbuilt wireless communication module in TESY appliances is to have a device which is able to connect to Wi-Fi
networks, and has a reliable Web browser and internet connection.
Product
Model Name
Frequency range
Rated RF output power
Number of channels
Separation between channels
Modulation type
Antenna type
Protocol
Hereby, TESY Ltd. declares that the Electrical convector with a built-in wireless communication module (Wi-Fi) is in compliance with Directive 2014/53/EU.
Тhe full text of the EU declaration of conformity is available at the following internet address: https://tesy.com/products/heating-appliances/electric-
panel-convectors .
ORDER OF THE STEPS FOR CONNECTING THE INBUILT WI-FI
MODULE IN A TESY APPLIANCE TO THE INTERNET
You need to register in MyTESY
directly to button "Already a member, sign in".
There is an available application „MyТESY" for a smartphone or a tablet for
both Android , iOS
applications can be found in the stores Google Play, App Store and Huawei
AppGallery (the device which the application will be installed on should be
with the latest updated version of the respective operating system or at
maximum up to one previous version).
Registration in MyTESY app
1. Download MyTESY app - install the application that is suitable for your
smart device using the QR codes on the first page of the user manual.
2. You can change language from drop down menu located under TESY Brand.
„Register as a new
Choose
3. Fill in the registration form using a valid email address, names, phone.
4. In the next screen, log in to your newly registered account by entering
your e-mail address and password.
5. Open the MyTESY app
6. Go to button "Already a member, sign in", if you are already a registered
user. Enter your email address and password.
Press the „LOG IN" button.
The main screen of the app opens. Using commands from this screen, you
can:
6.1.
Personalise your user profile;
6.2. Add different TESY appliances;
6.3. Control the appliances in the list of Devices and monitor their current
status;
Status indication of the appliance:
-the appliance is turned on. Press the button to turn the appliance
off;
- the appliance is turned off. Press the button to turn the appliance
on;
ADDING A TESY DEVICE TO YOUR ACCOUNT
1. Select "Add device" in the main screen of the application, then press the sign
"Plus"
24
Operation and Storage Manual of Panel Heater
INSTRUCTIONS FOR OPERATION OF ELECTRICAL CONVECTOR VIA THE INTERNET
SPECIFICATION OF ΤΗΕ BUILT-IN WIRELESS COMMUNICATION MODULE (WI-FI)

EU DECLARATION OF CONFORMITY

��
/
/QUICK START
app. If you already have a registration, go
and Huawei operating system. The
user", through the button „Sign up„
/QUICK START �� /
Wi-Fi module
ESP32-SOLO-1
2. 412 - 2.484 GHz
20 dBm
13
22 MHz
OFDM
PCB/3.4bBi
ΙΕΕΕ802. 11 b/g/n20/n40
The following is a list of requirements that are necessary for you to successfully
connect the device. Select the "First steps" button.
In the next screen, you need to enable location settings. It then confirms
with the „Permission" button that the MyTESY application has access to your
location.
Next is a confirmation screen „ok", which includes the location settings of the
device you use to connect the device.
2. Select „Continue" and the device starts searching for compatible
devices.
Note: Check that the Wi-Fi network of the convector is switched on, there
is an indication on the screen
3 seconds, use the Up / Down buttons to find the Wi-Fi function, then select On
and confirm with the Mode button.
•
Select the network from the list
•
Press "Continue".
•
Enter the password of the selected network
•
Press "Continue".
3. A message is displayed confirming the connection to the selected
network on the screen of the device by pressing the Mode button.
4. In the next screen, enter a device name and select the device power
from the drop-down list.
Press "Continue".
Note: The power is indicated on the type plate of the appliance.
A message about a successfully added device to your account appears and
after the „End" button the device appears in the main screen of the application.
On the main screen of the application you have access to:
•
a list of devices that have been added to your account
•
button to add new devices
•
notifications
•
account customization settings - account information, password change,
sign out of the application
DEVICE MANAGEMENT
From the list of registered devices, select the device you want to control.
A screen opens with controls that allow you to select the mode of
. To turn on the function, hold Mode for
/QUICK START �� /
QUICK START ��