Table of Contents
Advertisement
Snap Server 410
Replacing the Top Cover
Be sure to replace the top cover. Do not operate the server if the top cover is not in
place.
Lower the top cover onto the server.
1
From the rear of the server, push the cover forward until it is firmly seated.
2
Tighten the thumbscrews.
3
Restoring Power to the Server
If you removed the server from the rack, replace it now.
1
Reattach all cables to the rear of the server.
2
Press the power button on the front of the server.
3
Field Service Documentation
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Adding or Replacing a SCSI Card
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Snap Server 410 and is the answer not in the manual?
Questions and answers