Microtech AiDEX User Manual page 61

IEC60601-1-2 Table 201
Guidance and manufacturer's declaration – electromag-
The device is intended for use in the electromagnetic environment
specified below. The customer or the user of the device should en-
sure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emis-
sions IEC 61000-
3-2
Voltage fluctua-
tions/Flicker emis-
sions IEC 61000-
3-3
netic immunity
Electromagnetic environment -
Compliance
guidance
The device uses RF energy only for
its internal function. Therefore, its RF
Group 1 emissions are very low and are not
likely to cause any interference in near-
by electronic equipment.
The device is suitable for use in all
establishments, including domestic
Class B establishments and those directly
connected to the public low-volt-
age power supply.
Move to a place within the normal
Class A operating temperature range and
repeat the test.
Repeat test. If you see the same
Complies result, contact your healthcare
professional immediately.
57