Signal And Alarm Output - UWT Rotonivo RN 4000 Series Technical Information/Instruction Manual

Rotonivo
Signal and alarm output
Overview
Overview of signal and alarm output for the different electronics versions: see page G4
Signal output:
Versions without FSH/FSL
Switching logic
Versions with FSH/FSL
FSH: Set in case of using the sensor as a full detector.
FSL: Set in case of using the sensor as an empty detector.
RN 4000
Level limit switch
®
Series RN 4000
Technical information / Instruction manual
Power failure or line break is regarded as „full" signal (protection against overfilling).
Power failure or line break is regarded as „empty" signal (protection against running dry).
yellow
green
Power
failure
DC
red
green
yellow
gi010114
LED
Factory setting: FSL
page G
1
2
3
4
5
6
7
8
9
10
11
12
13