Table of Contents
Advertisement
5.0
Maintenance
5.1 User Advice
Check that the bearing surfaces that are in contact with the rail are clean and can move
freely.
Ensure that the vertical beam locks firmly into place and there is no slack in any direction.
Ensure the laser window on the vertical beam and the REFOS laser unit are clear.
5.2
Every 3 Months
Visually check for damage to any parts of the gauge.
Ensure the vertical beam moves smoothly across the cross beam using the stagger
adjustment wheel.
5.3
Annual
To ensure the ongoing accuracy of your ABT8000, the gauge should be calibrated every
12 months. For UK users this means returning to Abtus for re-calibration and for overseas
users this means returning to your local Abtus Representative, a list of which can be found
on www.abtus.com.
6.0
Trouble Shooter
6.1
Readings are not showing or incorrect
Ensure the batteries are fully charged.
Restart the gauge and reconnect the DLLHS to the app. Ensure the 'Connected' message
appears when pressing the 'Connect' button.
21
Advertisement
Table of Contents
