Abtus ABT 8000 Instruction Manual page 18

Data logging laser height & stagger gauge
Hide thumbs Also See for ABT 8000:
Table of Contents

Advertisement

(Left – Choose & share .csv function, Right – Sending .csv via Gmail)
4.9.4
Disconnecting the DLLHS gauge from the mobile device
The user may wish to disconnect the mobile device from the DLLHS gauge to share a recording
via email which requires an active internet connection. This can be achieved in two different way;
1)
Turn off the DLLHS device using the power button and force disconnect from the Wi-Fi
the device produces and connect to an internet connection.
2)
Manually connect to a different Wi-Fi source other than the DLLHS device's Wi-Fi
connection through the mobile device settings. This can be accessed by pressing the
'Wi-Fi' button on the home page of the device.
Most Wi-Fi connections are secured by a password and this will be required to
connect to the internet.
3)
If the mobile device has a SIM card with mobile network access, then the file can be
shared via email without disconnecting or turning off the DLLHS gauge.
Figure 18 – Emailing .csv results
18

Advertisement

Table of Contents
loading

Table of Contents