sparklike Laser Portable 2.0 Instruction Manual

Your IG Quality Assurance
NOTIFICATIONS:
Do not position the equipment in a way that it would be
Î
difficult to reach and operate the power cable.
If the equipment is used in a manner not specified by the
Î
manufacturer, the safety protection of the equipment
may be compromised.
Do not replace detachable mains supply cords with
Î
inadequately rated cords.
Always make sure that you are using a safety grounded
Î
socket with a safety grounded mains supply cord to
connect the mains supply.
INSTRUCTION MANUAL
Sparklike
Laser Portable
Table of Contents
1. Sparklike Laser Specifications
2. Starting up the Sparklike LASER
3. Start using the equipment
4. Taking a measurement
5. Troubleshooting
6. Service and maintenance
7. Connections
8. Technical specifications
Never flush the device with a gas flow greater than 3 litres/
Î
min (Chapter 3.2).
To ensure the measurement accuracy device must be
Î
calibrated annually.
Unauthorized modification or replacement of components
Î
is forbidden. This will void the warranty and may cause
danger to the user. For maintenance, refer to Sparklike Oy or
Sparklike Service Partners.
Sparklike technology since 2000
2.0
™