Advertisement
Disassembly
To disassemble the drywall lift for transport or compact storage;
1.
Crank the cradle down.
2.
Slide the cradle outriggers in until they latch. Close the panel support hooks.
3.
Remove the crossarms by pressing the spring tab on the bottom and sliding the
crossarm out of the tapered socket.
4.
Unlock the cradle tilt latch. Lift the cradle ~7cm until you can remove it from the
frame.
5.
Rotate the winch wheel one full rotation forward as shown. This will raise the inner
telescoping section.
Press spring
tab to
release
crossarm
Advertisement
