Advertisement
6.
Unlock the winch assembly by lifting the slide bar with your left hand while you
rotate the slide bar lock counter-clockwise with your right hand.
7.
Hold the slide bar lock in this disengaged position (step 6). Press down on the
telescoping sections in the frame with your left hand. The winch assembly will
move toward the frame housing.
8.
Crank the telescoping sections down. Swing up the retaining hook as shown and
crank the telescoping sections back up slightly until secured by the hook.
9.
Hold the retaining hook in this position with your left hand and rotate the winch
forward with your right hand. The winch assembly will fold up against the frame.
When the slide bar contacts the frame, tighten the cable by turning the wheel
further (just enough to hold the winch assembly in this position).
10. Carefully lift the frame/winch ~2.5cm to free it from the tripod base.
11.
To fold the base, press down on the slide yoke ring and pivot the forward legs
inward until they lock in the closed position.
Advertisement
