Advertisement
Tilt latch
To allow the cradle to tilt (for loading a drywall panel or raising the panel to a side wall or
sloped ceiling) or to remove the cradle from the frame, pivot the tilt latch out and down. To
lock the cradle onto the frame without tilting, pivot the latch up to engage the stud on the
cradle.
Note:
When it is in the level (non-tilted) position, the cradle will also tilt up to 10° side-to-side.
Brake arm
A spring-loaded brake holds the cradle at whatever height you raise it by cranking the winch
wheel. To lower the cradle, control the backward rotation of the winch by grasping the wheel
handle as you carefully raise the brake arm to release the brake.
Tilt latch
Stud
Break arm
Advertisement
