Advertisement
6.
Attach the cradle to the frame (Figure 6).
a.
Insert the cradle's post into the opening on top of the frame.
b.
Secure the cradle to the frame by snapping the tilt latch upward so it
hooks over the stud on the cradle.
7.
Attach the crossarms to the cradle (the crossarms are interchangeable):
a.
Slide the tapered plates on the crossarms into the tapered sockets on the
cradle (Figure 7).
b.
Press each crossarm forward into the socket until the spring tab on the
bottom of the crossarm snaps into place (Figure 8).
Snap latch
upward
Top View
Spring tab
Stud
Advertisement
