Electronic Oven Controls - KitchenAid KSGB900ESS Manual

Electronic Oven Controls

Control Display
The display will flash when powered up or after a power loss.
Press CANCEL or CANCEL UPPER to clear. When the oven is
not in use, the time of day is displayed. If the range is in Energy
Save mode, the display will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
■ Valid keypad press
■ Oven is preheated (long tone)
■ Function has been entered.
■ Reminder, repeating each minute after the end-of-cycle tones
Three Tones
■ Invalid keypad press
Four Tones
■ End of cycle
Use the Settings/Clock or Clock/Tools keypad to change the
tone settings. Depending on your model.
Energy Save
The Energy Save mode puts the range into Sleep mode and
reduces energy consumption.
To Activate the Energy Save Mode:
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "ENERGY
SAVE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
5. The setting will be activated after 5 minutes.
To Deactivate the Energy Save Mode:
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "ENERGY
SAVE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
5. The clock will reappear in the display and the range can be
operated as usual.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Settings/
Clock or Clock/Tools keypad.
Use the Settings/Clock or Clock/Tools keypad to scroll through the
features that can be changed. Each press of the Settings/Clock or
Clock/Tools keypad will advance the display to the next setting.
After selecting the feature to be changed, the control will prompt
you for the required input. Then press START or CANCEL/
CANCEL UPPER to exit and display the time of day. Details of all
of the feature changes are explained in the following sections.
Press CANCEL/CANCEL UPPER to exit Settings.
Clock
The Clock can use a 12- or 24-hour cycle.
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "CLOCK"
is displayed.
2. Use the number keypads to set the time of day.
3. Press START to change the time.
4. Press "3" for AM or "6" for PM.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed to
Celsius.
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "TEMP
UNIT" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL/CANCEL UPPER to exit and
display the time of day.
Audible Tones Disable
Turns off all tones, including the end-of-cycle tone and keypress
tones. Reminder tones are still active when all tones are disabled.
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "SOUND"
is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL/CANCEL UPPER to exit and
display the time of day.
Sound Volume
Sets the volume of the tone to either high or low.
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "SOUND
VOLUME" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL/CANCEL UPPER to exit and
display the time of day.
End-of-Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "END
TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL/CANCEL UPPER to exit and
display the time of day.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until
"KEYPRESS TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL/CANCEL UPPER to exit and
display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end-of-cycle tones.
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until
"REMINDER TONE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL/CANCEL UPPER to exit and
display the time of day
12/24 Hour Clock
1. Press SETTINGS/CLOCK or CLOCK/TOOLS until "12/24
HOUR" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL/CANCEL UPPER to exit and
display the time of day.
4