Advertisement
OPERATION
Auto On/Off
Reset
Time
Speed
Distance
Calorie
Odometer
Pulse
Scan
•
The system turns on when any key is pressed or when it receives
input from the speed sensor.
•
The system turns off automatically when the speed has no signal
input or is inactive for approximately 4 minutes.
The bike can be reset by either changing battery or pressing and holding
the MODE key for 3 seconds.
Press the MODE key until the pointer on the display advances to TIME.
The total working time will be shown from the moment you start
exercising.
Press the MODE key until the pointer on the display advances to
SPEED. The current speed will be shown.
Press the MODE key until the pointer on the display advances to DIST.
The distance of your workout will be shown.
Press the MODE key until the pointer on the display advances to CAL.
The calories burned during your workout will be shown.
Press the MODE key until the pointer on the display advances to ODO.
The total accumulated distance of your workout will be shown.
•
Press the MODE key until the pointer on the display advances to
PULSE.
•
Your current heart rate will be displayed in beats per minute.
•
Place the palms on both the pads and wait for 30 seconds for the
most accurate reading.
Automatically display changes between functions every 4 seconds.
Advertisement
