Inlet Pressure - Fire Mountain EVEREST 3 BURNER GAS BBQ Assembly Instructions Manual

• Do not use this appliance for any other use than the one for which it is
dedicated to.
• A regulator complying with the inforce national norm will have to be
connected to the gas tank in order to obtain the appropriate gas pressure.
• Do not make any modification on regulator pressure or on the burners.
Any modification of the appliance may be dangerous.
• Leak test all gas connections each time you connect the regulator to the
gas tank.
• Use heat resistant gloves when cooking with your appliance.
DATA BADGE FOR THE EL-1103TWHK-A MOBILE BARBECUE
DECLARED HEAT
INPUT CAT.

INLET PRESSURE

SETTING PRESSURE
BURNER TYPE
NO.OF BURNERS
INJECTOR SIZE AND
MARKING
INLET CONNECTION
IDENTIFICATION
CODE
FOR USE OUTDOORS AND IN WELL VENTILATED AREAS.
WARNING: ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN AWAY
READ THE INSTRUCTION LITERATURE BEFORE USING THE APPLIANCE.
CLOSE THE VALVE OF THE GAS CYLINDER OR THE REGULATOR AFTER USE.
THE USE OF THIS APPLIANCE IN ENCLOSED AREAS CAN BE DANGEROUS AND IS
PROHIBITED.
THE HOODED APPLIANCE MUST ALWAYS BE LIT WITH THE HOOD IN THE OPEN
POSITION.
UNDER NO CIRCUMSTANCES COULD THE APPLIANCE BE LIT WITH THE HOOD IN THE
CLOSED POSITION.
MADE IN CHINA
TOTAL RAT AT 10.5 KW (764g/h),EACH MAIN BURNER 3.5 KW
(255g/h)
I
3B/P(30)
G30 BUTANE /
G31 PROPANE
AT 30mbar
AS FOR INLET PRESSURE
CAST IRON BURNER
3 MAIN BURNERS
0.91 mm
(MARKED 0.91)
NOZZLE OR CONE END FITTINGS DEPENDANT ON THE
NATIONAL SITUATIONS IN COUNTRIES DESTINATION
0063CQ7671
I I
3+(28-30/37)
G30 BUTANE
G30 BUTANE
/
AT 28-30mbar /
G31
G31 PROTANE
PROPANE AT
AT 37mbar
50mbar
0.81 mm
0.91 mm
(MARKED
(MARKED 0.91)
0.81)
3
3B/P(50)
G30 BUTANE
/
G31
PROPANE AT
37mbar
0.86 mm
(MARKED
0.86)
I
3B/P(37)